DAQ-Notebook

MC16/64 STAND-ALONE - Data acquisition system with telemetry and DAT recorder option. "From sensor to result" This newest product from KMT represent a new generation of data acquisition systems. The design follow our philosophy... .

For further information contact our support team - support@rtcontrol.com

4 channel signal conditioning unit, mixed installation practicable with modules for STG, LVDT, ISO, THERMO, F/V, ICP, FILTER, Excitation 2 ranges by use of jumpers (4 or 8 V), Gain: 3 ranges by use of jumpers (10, 100 or 1000), Zero balancing of STG via potentiometer, Full-, half- or quarter-bridges

For further information contact our support team - support@rtcontrol.com

8 channel signal conditioning unit, mixed installation practicable with modules for STG, LVDT, ISO, THERMO, F/V, ICP, FILTER, Excitation 2 ranges by use of jumpers (4 or 8 V), Gain: 3 ranges by use of jumpers (10, 100 or 1000), Auto Zero balancing of STG Full-, half- or quarter-bridges 1

For further information contact our support team - support@rtcontrol.com

ONLY IN GERMAN!
Sollen mehrere Kanäle nach der beschriebenen, analogen FM-Technik übertragen werden, müssen mehrere unterschiedliche Trägerfrequenzen und eben so viele selektive HF-Empfänger verwenden werden, was das Kosten/Nutzen-Verhältnis unverhältnismäßig vergrößern würde. Die Lösung des... More>>>

Synopsis of KMT rotating digital telemetry systems Synopsis of KMT rotating digital telemetry systems:   ... More>>>

Telemetry system for rotating Applications, Direct sensor connection for STG, TH K, ICP and High level inputs (+/-5V or +/-10V), Signal bandwidth 16 x 0...375Hz with 320kbit, Distance up to 250m between transmitter and receiver, Integrated Battery for up to 12 hours operating time, Waterproofed... More>>>

Small Telemetry System with 2 channels, direct Sensor connection · 2 channels, 12 bit resolution, simultaneous sampling of all channels · Anti aliasing filters · Direct sensor connection for STG, Thermo couples K or high level inputs · +/- 5V analogue output at the receiver side, optional dig.... More>>>

4 (8) Channel wheel telemetry system for connection with strain gages, force, temperature and vibration sensors as well as high level input +/-5 or +/-10Volts. · 4 different carrier frequencies (433.3, 433.7, 434.1 or 434.5 MHz) enable measurements at 4 Wheels for one car. · A mixed... More>>>

with 8 channels, direct Sensor connection · 8 channels, 12 bit resolution, simultaneous sampling of all channels · Anti aliasing filters · Direct sensor connection for STG, Thermo couples K or high level inputs · +/- 5V analogue output at the receiver side, optional dig. output for PC... More>>>

Telemetry system for rotating Applications, Direct sensor connection for STG, TH K, ICP and High level inputs (+/-5V or +/-10V), Signal bandwidth 8 x 0...95Hz with 40kbit tx or 8x 0...750Hz with 320kbit tx, Distance up to 250m between transmitter and receiver, Integrated Battery for up to 6 hours... More>>>

Digital one channel radio telemetry system for strain gage applications on rotating shafts, “Controlled Gain and AZ at receiver side” Signal bandwidth up to 550Hz, Distance transmitting to receiving antenna 1-10 meter, Powering transmitting side: 6-9V Litium battery   ... More>>>

Mini Telemetry System up to 32 channels, direct Sensor connection. 12 bit resolution, simultaneous sampling of all channels, Anti aliasing filters, Direct sensor connection for STG, Thermo couples K and ICP sensors, +/- 5V analogue output at the receiver side, optional dig. output for PC interface,... More>>>

TEL32 Telemetry system 32 channel digital telemetry system 32 channels Analogue signal bandwidth 0 Hz-800 Hz/channel with 2.45 GHz transmitter 12 bit resolution Simultaneous sampling of all channel Anti-... More>>>

Digital one channel telemetry system for strain gage applications on rotating shafts “Controlled Gain and AZ at receiver side” ,Signal bandwidth up to 1200Hz (-3dB),Distance transmitting coil to receiving head 20 mm (Optional 35mm),Powering transmitting side : Inductive   ... More>>>

Digital one channel "HIGH SPEED" telemetry system for strain gage and ICP applications on rotating shafts “Controlled Gain and AZ at receiver side” Signal bandwidth up to 50,000, Distance transmitting coil to receiving head 20 mm (Optional35mm), Powering transmitting side : Inductive, ... More>>>

TEL1/40k TTL 1 Channel TTL Telemetry. Transfer TTL pulses from 40 - 40000 TTL Impulsen/s   40 ... 40000 TTL Impulses/s Range 300-500 m 4 Telemetry systems can work at the same time with different... More>>>