rtControl.com


> Modal Analysis

<<Back

Products

M1 Series Vibration Test System

The ‘M1’ Series vibration testing system is ideal for screening of small size assemblies with high acceleration test requirements and can also meet typical vibration test requirements of other medium sized electronic assemblies, automotive components, road navigation units and home appliances. The ‘M1’ Series is designed to meet military and international test standards including MIL, ASTM, IEC, ISO, BS and JIS. A wide diameter armature with high cross axial stiffness when coupled to proportional head expander to test multiple specimens simultaneously yet achieving a good vibration transmissibility ratio. Other test requirements including transportation vibration simulation, combined vibration-environmental test and seismic simulations for small size components can easily be fulfilled by the ‘M1’Series.

Features:

The Performance:
Specimen payload to 500kg(1,100lbs)
Excellent random performance meeting ISO standard with 3 sigma peak current rating
Armature diameters range from 240mm to 370mm(9.5 inch to 14.6inch)
Up to 51mm(2 inch) continuous displacement (pk-pk)
Test frequency up to 3,000 Hz

The Shaker:
Rugged trunnion design with bearing guidance
Air bag or elastomer isolator built-in reducing dynamic floor stress
Dual layer reinforced armature for high acceleration performance
Roller-truss flexure suspension system with high cross axial stiffness

The Amplifier:
Integrated with high performance amplifier
Modular designed amplifier
12 KVA power module with two self-reliant compact 6KVA sub-modules
High modulation switching frequency
High signal to noise ratio
Low total harmonic distortion
Individual power module operation indication light

The Accessories:
Air load support for armature centering
Dynamic and static armature centering available
Rotary worm-gear built-in for uni-base slip table
Thermal barrier for combined environmental chamber test available
Remote control capabilities available

System Specification:

Measure	American	Metric	American	Metric	American	Metric	American	Metric
System model	TMC-10H-240M		TMC-15H-320M		TMC-20H-320M		TMC-30H-370M
Sine Force	2,200 lbf	1,000 kgf	3,300 lbf	1,500 kgf	4,400 lbf	2,000 kgf	6,600 lbf	3,000kgf
Random Force	2,200 lbf	1,000 kgf	3,300 lbf	1,500 kgf	4,400 lbf	2,000 kgf	6,600 lbf	3,000kgf
Usable Frequency Range	DC～4,000 Hz		DC～3,000 Hz		DC～3,000 Hz		DC～2,500 Hz
Continuous Displacement (p-p)	2 inch	51 mm	2 inch	51 mm	2 inch	51 mm	2 inch	51 mm
Max. Velocity (Sine)	78.7 in/s	2 m/s	78.7 in/s	2 m/s	78.7 in/s	2 m/s	78.7 in/s	2 m/s
Max. Acceleration (Sine)	100 g	981 m/s2	75 g	735.4m/s2	100 g	981 m/s2	100 g	981 m/s2
Handbook (PDF)	Download		Download		Download		Download

For further information contact our support team - support@rtcontrol.com